 |
Denso
Steelcoat 400 System comprising deep penetrating primer (Denso
Penetrating Primer), an easily applied layer of semi-coated acrylic backed
tape (Denso Ultraseal Tape) and a choice of topcoats (Denso Acrylic or
Urethane Topcoat).
The
final topcoat can be reinforced with a selected reinforcing scrim (Denso
D5 or D10 Scrim) for sections of steelwork or pipework which require additional
impact resistance. After priming, Denso Profiling Mastic is first utilised
to seal and profile back to back angles, voids, flanges or fittings, before
application of Denso Ultraseal Tape and selected topcoat.
|
MINIMUM SURFACE PREPARATION: HAND/POWER TOOL CLEANING 
