Leaders in Corrosion Management & 

Sealing Technology 

SeaShield Series 

Preventive Maintenance

Splash Zone Protection
 




Examples of Applications

SEASHIELD SERIES 200DM SYSTEM (New)

Other SeaShield Series Projects >>

Corrosion prevention systems on a Jetty should be inspected on regular basis; e.g. SeaShield Jetty Systems should be inspected on mechanical damage by debris or third parties. If damage is observed repair has to take place in accordance manufacturers instructions.

 

Preventive Maintenance SeaShield Systems
Pile Before maintenance with the SeaShield Series 200DM System. The upper part of the old HDPE Jacket has disappeared and without this protection the Denso Marine Piling Tape and Denso Paste S105 have partly been washed out by the Seawater.
The old remaining Denso Marine Piling Tape is being removed. The pictures shows only in two damaged/unprotected area's starting corrosion. The area under the old Denso Marine Piling Tape doesn't show any corrosion !
The old remaining Denso Marine Piling Tape and other loose items are removed.
The pile is (re)treated with Denso Paste S105  (T) (Primer)
Applying Densyl Tape or Denso Marine Piling Tape (T)	Applying Densyl Tape or Denso Marine Piling Tape (T)	Installing the heavy duty SeaShield Series 200DM HDPE Jacket/Coat (5 meter length)
Pile After installation SeaShield Series 200DM System

Check out  'The Proof is in the Testing'

 << Return to the previous page

Choose your Topic of Interest:

Home | About | Denso Products | Gas | Water | Contact | Site Map | News | Careers | Inquiry

 Legal Disclaimer    

©2005-2007  Copyright Imbema Pacific Indonesia